Versions Compared

Old Version 2

changes.mady.by.user Agne P.

Saved on

compared with

New Version Current

changes.mady.by.user Agne P.

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Performance Improvements

Client-side Performance Improvements

  • Refactoring Elements. Converting an element from one type to another is two to four times faster than in 2021x Refresh2.
    Image Removed

    A chart comparing the conversion of the Block to Signal operation in Refresh2 and 2022x.
    • Content layer
    id753686899


    UAF 1.2 Features

    Methods and Standards

    Beginning with this version, the UAF 1.2 Plugin is available for use in production. The UAF 1.2 Profile is fully supported in UAF, UAF Enterprise Architect, DoDAF, DoDAF 2.0, MODAF, NAF, and NAF 4.0 frameworks. The following migration will be necessary:

    Learn more about the duration of project migration >>

    Image Removed

    IMPORTANT! The UAF 1.1 Plugin is no longer available.

    Image Removed
    Evolution of standards

    UAF 1.2 support

    Together with the UAF 1.2 Profile, the following changes (such as new aspects*, viewpoints**, diagrams, and tables) are implemented:

    • Interaction Scenarios Aspect is renamed to Sequences Aspect.
    • New Architecture Management Viewpoint:
      • New Architecture Management diagram.
      • Dictionary is a part of Architecture Management Viewpoint.
    • New Motivation Aspect:
      • New Strategic Motivation diagram.
      • Requirements view specification is a part of Motivation Aspect for operational, personnel, resources viewpoints.
      • New Security Controls diagram.
    • Improvements in Strategic Viewpoint:
      • Support of Value Streams.
      • Introduced Strategic Constraints, new Strategic Constraint table in UAF Framework, and new C8 Planning Assumption table in NAF 4.0 Framework.
      • Introduced Strategic Exchanges.
      • New Strategic Processes diagram.
    • Improvements in Services Viewpoint:
      • Introduced Service Contract constraints.
      • Introduced Service Exchanges.
      • Service Association stereotype is introduced and applied to associations between Services.
      • Resource Service introduced to model technical services, such as web services. 
    • Improvements in Security Viewpoint:
      • Risks as a cross-cutting construct bringing new Risks diagram available in most viewpoints, under Parameters Aspect.
      • New Security Constraints table.
    • Implementation Matrix enhanced and adapted to UAF 1.2 Profile.
    • Support Personnel Traceability.
      • Functions to Operational Activities and Actual Responsible  Resources to Actual Project Mapping matrices are available in Personnel Traceability View Specification.
    • Improvements in Information Aspect:
      • Dictionary is a part of Information Aspect.
      • Introduced Strategic Information element and new Strategic Information diagram.

    *Aspects were previously known as model kinds.

    **Viewpoints were previously known as domains.

    Image Removed
    UAF 1.2 grid.
    (Click the image to enlarge)

    Library Support

    New DISR and UJTL library versions are now available:

    • UJTL (20220215)
    • DISR (20211110)

    You can choose the library version when creating a new project. Learn more about using libraries >>

    ArchiMate Import (Technology preview)

    In this version, we continued developing the import of the ArchiMate model from the open exchange file into the UAF project. The imported element mapping is still only partial, but adapted to the UAF 1.2 profile. The mapping of ArchiMate 3.1 to UAF 1.2 approach is based on the NATO Architecture Framework. Learn more >>

    Image Removed

    SysML Features

    Instantiation Wizard Improvements

    SysML Plugin 2022x brings several improvements in automatic instance creation using the Instantiation Wizard. You can now save time by specifying the names and custom stereotypes of Instance Specifications while creating them. We have also introduced new UI options that will help you select the elements to be instantiated quicker than before. Last but not least, the Instantiation Wizard performance has been improved for even better user experience.

    Image Removed

    Instantiation Wizard improvements.

    SysML 1.7 Support

    As of version 2022x, the SysML Plugin supports the upcoming SysML 1.7 specification which brings the following changes:

    • The QUDV model library for owned operations has been updated. The dependsOnUnits owned operation has been redefined with the dependsOnUnits operation owned by Unit for the following blocks: SimpleUnit, DerivedUnit, and ConversionBasedUnit. The dependsOnQuantityKinds owned operation for the SimpleQuanitityKind block has been redefined with the dependsOnQuantityKinds operation owned by QuantityKind.

    • In the QUDV model library, the multiplicity of Prefix::Symbol has been changed from [1] to [0..1].
    • A new symbol property allows renaming allocation compartments according to the SysML 1.7 standard. The "allocatedTo" compartment will be renamed to "allocatedToElements", and the "allocatedFrom" compartment to"allocatedElements".
    Easier Requirement Verification

    Performing automated Requirements verification in Requirement Tables is now easier as verification-specific columns and Legend are auto-displayed once the verification context - block or instance - is assigned.

    Back to top

    Content column
    width100.00002%
    id753686902


    Content block
    id753686898

    Anchor
    top
    top

    Released: November 10, 2023 


    To download In the latest 2024x version , see Downloading installation files. For further information, check the product documentation.

    Content block
    id243271308

    UAF 1.2 Features

    SysML Features

    Data Markings and Classification Plugin

    Performance Improvements

    Modeling and Infrastructure

    Discontinued Products

    Reader Mode

    Collaboration

    Content block
    id753686901
    Content block
    id244508097
    Content block
    id256630726
    Data Markings and Classification Plugin

    The 2022x version introduces a new product: Data Markings and Classification Plugin. This plugin is designed for system and software engineers, enterprise architects, business analysts, and others who work with classified or sensitive data. It provides compatibility with the DoD Manual 5200.01 Volume 2 specification. Using the Data Markings and Classification Plugin, you can specifically mark your model elements to indicate different levels of classification or sensitivity. The plugin allows you to:

    • Use predefined DoD data markings and/or create custom ones.

      Image Removed

    • Access data markings via diagram (also symbol, table row, etc.) and element shortcut menus, as well as their specification windows.

      Image Removed

    • Add data markings to various elements (relationships, blocks, packages, ports, operations, properties, comments, etc.) of your project.

      Image Removed

    To see it in action, watch the following demo.

    Widget Connector
    width700
    urlhttps://www.youtube.com/watch?v=OBvX40zgbqc&t=1s
    height349

    Learn more about the Data Markings and Classification Plugin >>

    Content block
    id272319258

    of UAF, significant enhancements have been introduced. Behavior to Structure Synchronization has been enriched, allowing the automatic construction of structure models from defined activities and enabling one-click generation of Internal Connectivity diagrams.

    Diagramming improvements include specialized Security Process Flow diagrams aligned with Operational and Resource viewpoints and new NAFv4 Structure diagrams for Logical, Service, and Physical Resource Specification Viewpoints.

    Additionally, the Strategic Viewpoint now offers simplified assembly tools, such as the Strategic Motivation Table and the Impact Matrix, enhancing analysis and traceability. Exchange management has been refined for better visibility control, and various dialogs have been optimized for efficient review and management. These enhancements, along with improved library support and renamed perspectives, provide you with a more intuitive and efficient modeling experience.

    In SysML modeling, the 2024x release introduces several improvements to Item Flow creation and editing. The  Create / Edit Item Flow  dialog now provides greater clarity and usability, providing a more focused approach to reviewing Activity Pairs connected with existing Activity Edges. In addition,  Autowire Parts  and  Delegate Port(s)  commands' availability is changed in the SysML Internal Block Diagram and the SysML Parametric Diagram. Also, the  Delegate Port(s)  command functionality regarding nested ports is now improved to treat each displayed nested port individually.

    For general modeling and infrastructure, this release presents the DSLS licensing option, the ability to zoom the Modeling Browser using keyboard shortcuts, and additional Legend adornment properties in Tables. Additionally, OpenJDK is now updated to version 17.0.8+7, CentOS Linux 7 is now replaced with Oracle Linux 8.8 support, and the JavaScript Rhino engine is now upgraded from 1.7R4 to the 1.7.13 version.

    Several features have been discontinued with the 2024x version, such as the JavaScript Nashorn language usage, Record Macro functionality, and the SPEM plugin.

    We have exciting news for collaborative modeling, as well. The new file exchange format .szip is now out of technology preview and was improved with a UI dialog for ease of use. Also, we introduce a major new feature: the Model Patch mechanism, a significantly lighter solution to move project changes. There are enhancements for 3DEXPERIENCE projects, too; you can now manage used projects more easily and open certain projects in a read-only mode.

    To download the latest version, see Downloading installation files. For further information, check the product documentation.

    Note
    title2024x Hot Fix 2 available

    2024x Hot Fix 2 is now available for CATIA Magic and No Magic portfolios. It includes a number of improvements and bug fixes, and vulnerability fixes in our modeling tools, plugins, and server products . Learn more >>


    Content block
    id243271308

    UAF 1.2 Features

    SysML Features

    Discontinued Features

    Known Migration Issues

    Modeling and Infrastructure

    Collaboration


    Content block
    id753686901
    UAF 1.2 Features

    UAF Behavior to Structure Synchronization

    In the 2024x version, the UAF Behavior to Structure Synchronization has been enhanced. Now, you can automatically build the structure model according to defined Activities and generate an Internal Connectivity diagram by executing a single-click command. Learn more >>>

    Image Added

    Diagramming

    New Security Process Flow diagrams

    With version 2024x, the Security Process flow diagram has been specialized to align with two distinct Operational and Resource viewpoints, which led to the creation of two new diagrams: Security Process Flow (Operational) and Security Process Flow (Resource).

    Image Added

    New NAFv4 Structure diagrams

    New structure diagrams have been implemented in the Logical, Service, and Physical Resource Specification Viewpoints:

           

    New views in Strategic Viewpoint

    Beginning with this version, the following new views related to the Strategic Viewpoint are introduced:

    • Strategic Motivation Table, which you can find under the UAF Strategy Diagrams category, is designed to simplify the assembly of UAF Strategic requirements, such as Enterprise Goals and Enterprise Objectives, in a tabular format. 
    • Impact Matrix, which you can find under the UAF Analysis Diagrams category, illustrates the mapping between the Strategic, Operational, Resource, Service Viewpoint Elements and Strategic Viewpoint Elements using the Impacted By relationship.

    Widget Connector
    width600
    urlhttps://www.youtube.com/watch?v=ngOqW2UVOSI&ab_channel=CATIAMBSE
    height400

    Exchange management improvements

    This version adds significant enhancements to working with exchanges, including the ability to control their visibility on diagrams. Improved exchange creation wizards and management dialogs provide greater clarity.

    Exchange visibility management

    Now, you can easily manage the visibility of realized exchanges in the diagrams. The dedicated button in the smart manipulator toolbar allows you to choose whether you want to show or hide required Exchange Items.

    Image Added

    This is an example of managing the visibility of Operational Exchange Items in an Operational Internal Connectivity diagram.

    Realized Exchange wizard improvements 

    Additionally, 2024x brings a more focused approach to reviewing Activity pairs connected with existing Activity Edges in the Realized Exchange wizards,  improving overall usability and clarity.

    • In the second step, our focus has shifted solely to reviewing existing Activity Pairs connected by existing Activity Edges. This means that creating new Activity pairs or editing existing ones is no longer possible. As a result, the tool will no longer trigger the automatic generation of new elements or diagrams.
    • We've introduced a new step called Affected Diagrams. This step lets you see where changes will occur after realizing elements or editing existing exchanges.
    Image Added An example of changes in the Realized Resource Exchange creation wizard.

    Exchange Manager improvements

    In this release, we've made improvements to the Exchange Managers. Now, you'll find a handy Affected Diagrams button that opens a dialog listing all the diagrams containing elements that already realize the selected exchange.

    Image Added An example of changes in the Operational Exchange Manager. 

    Producing and Consuming Functions dialog improvements

    We've made some changes in the Producing and Consuming Activities/Functions dialogs as well. They now serve as tools for reviewing Activity pairs and easily removing any unnecessary ones.

    Image AddedAn example of changes in the Producing and Consuming Activities dialog.

    Library Support

    New DISR and UJTL library versions are now available:

    • UJTL (20230616)
    • DISR (20230523)

    You can choose the library version when creating a new project. Learn more about using libraries >>

    Templates and Perspectives

    New template

    • A new EA Project Template with Process Guide is now available in UAF. This Enterprise Architecture (EA) Guide defines a workflow for creating EA views following the Unified Architecture Framework Modeling Language (UAFML). When using this template, you will receive a new UAF project enhanced with the EA Guide for UAF. This modeling guide aids in building architecture by providing nine steps of workflow.

    Renamed 

    • The UAF Enterprise Architecture Project was renamed to EA with BPMN Project. Using the EA with BPMN Project template, you will get a simplified Enterprise Architecture project with BPMN, which is based on the UAF framework and designed for enterprise and IT architecture modeling. Creating an EA with the BPMN project will switch the modeling tool to the EA-BPMN Architect graphical user interface and use the EA with the BPMN model template.
    • The perspective UAF Enterprise Architect was renamed to  EA-BPMN Architect.  Learn more about the perspectives >>>

    Removed

    • The UAF EA Project Template with Process Guide was removed.

    Other Enhancements

    • The nested ports in all relevant viewpoints are now supported.
    • The options for Information Flows in the Environment Options dialog under the UAF options group are no longer available.
    • The  Tools  option group containing the  Autowire Parts  action is removed from the UAF Parametric Diagram toolbar.
    • The Delegate Port(s)  action is now implemented in the Internal Connectivity Diagrams and is available from the diagrams toolbar and context menu of roles, connectors, and ports.
    • You can now create the Vision Statement in the Specification window of the Vision element.
    • New correctness validation rules regarding the Motivated By relationship are now available. These rules check if the Motivated By relationship is created between correct pairs.
    • A new passive validation rule COR2361 is implemented. This rule checks if an Operation Port Class Property type is correct.


    Content block
    id244508097
    SysML Features

    Improved Item Flow Creation and Editing

    SysML Plugin 2024x brings a more focused approach to reviewing Activity Pairs connected with existing Activity Edges in the Create / Edit Item Flow dialog, improving overall usability and clarity.

    • Now, the second step centers exclusively on reviewing existing Activity Pairs connected by existing Activity Edges, thus:
      • New Activity Pairs cannot be created, and existing Activity Pairs cannot be edited. Because of this, the tool will no longer initiate the automatic generation of new elements or diagrams.
      • The overall synchronization of the dialog's steps is now improved to ensure that all relevant Activity Pairs are systematically gathered based on specified preferences. This results in a well-organized diagram list in the third step, accurately representing selected options.

    Image Added

    A comparison of some of the changes in the second step of the Create / Edit Item Flow dialog between versions 2024x and 2022x Refresh2.

    Learn more about Item Flow creation and editing >> 

    Other Improvements

    • The Tools option group containing Autowire Parts and Delegate Port(s) commands has been removed from the SysML Parametric Diagram toolbar. Both Delegate Port(s) and Autowire Parts commands are no longer available for Constraint Properties and Constraint Parameters in the SysML Internal Block Diagram and the SysML Parametric Diagram.
    • Improved Delegate Port(s) command functionality regarding nested ports. Now if the command is called from a part or a port enclosing a nested ports structure, each displayed nested port is treated individually to create delegated connectors and ports. Learn more about automatic delegation >>

    Back to top


    Content block
    id256630726
    Discontinued Features

    The following features have been discontinued with the 2024x version release.

    JavaScript Nashorn Scripting

    The JavaScript Nashorn language usage has been removed from the modeling tool. Please use JavaScript Rhino instead. This affects expression-related functionality, e.g., custom validation rules, derived properties, smart packages, tables, and macros.

    Learn more about the deprecated JavaScript Nashorn >>

    Record Macro Functionality 

    The Record Macro functionality has been discontinued. However, any previously recorded macros can still be used in the modeling tool.

    SPEM Plugin

    The SPEM 2.0 Plugin (16.8 and 16.9 versions) has been discontinued.

    Known Migration Issues

    Projects created using modeling tools of version 19.x, may get corrupted after migration to version 2024x.

    To avoid project corruption, before migrating or opening projects for the first time, close the modeling tool, open the <modeling_tool_install_dir>\bin\<modeling_tool>.properties file, find the JAVA_ARGS line, and add the -Dskip.ProjectCleanup=true (for MAC OS: -Dskip.ProjectCleanup\=true) argument as one of its values.

    Back to top


    Content block
    id272319258
    Modeling and Infrastructure

    DSLS Licensing

    Starting with the 2024x release, we are introducing a new licensing option - DSLS (Dassault Systèmes License Server). DSLS is a licensing system developed by Dassault Systèmes that provides these benefits:

    • License usage statistics, debugging, and simple UI to administer and view statistics.
    • Licenses are bound to their expiration date rather than the product version.
    • Nodelock (seat), floating, and managed licensing options.

    Thus, now you can choose to use either FlexNet or DSLS for product licensing. 

    Note

    The DSLS version must be compatible with the modeling tool version you use (currently, DSLS version R2024x with modeling tool version 2024x).

    Learn more about DSLS Licensing >>

    Anchor
    Zoom in Model Browser
    Zoom in Model Browser
    Zoom in Model Browser

    From now on, you can easily increase the size of the displayed data in the Model Browser tabs. Zoom in and out using keyboard shortcuts to modify the view to your liking. 

    Image Added

    Zooming in the Model Browser using keyboard shortcuts.

    Learn more about zooming in the Model Browser>>

    Advanced Legend Adornments in Tables

    In addition to using Legend Items' Fill Color property to color table cells, now you can also add and color cell borders via the Pen Color and Line Width properties, as well as change the color of the text via the Text Color property, allowing you more options to emphasize specific data rows in tables.

    Image Added

    Text Color, Pen Color, and Line Width adornment properties are specified for the Legend Item In Progress.


    Anchor
    MIother
    MIother
    Other Improvements

    • OpenJDK version update. Desktop applications (MagicDraw, Cameo Systems Modeler, Cameo Enterprise Architecture, Magic Software Architect, Magic Cyber Systems Engineer, Magic Systems of Systems Architect) and Teamwork Cloud are now only run using OpenJDK 17.0.8+7 version. 
    • Supported operating system changes for Linux. CentOS Linux 7 has reached End of Life; thus, it is no longer supported. It is now replaced with Oracle Linux 8.8 support. 
    • JavaScript Rhino version update. The JavaScript Rhino engine is now upgraded from 1.7R4 to the 1.7.13 version.
    • It is no longer necessary to display the pin's type when displaying its multiplicity due to the newly introduced Show Multiplicity symbol property.


    Back to top



    Content block
    id243174490
    Anchor
    Collaboration
    Collaboration
    Collaboration

    Anchor
    TWC
    TWC
    Teamwork Cloud

    New File Exchange Format for Server Projects

    In version 2022x Refresh2, we introduced .szip – a new server project exchange format. It addresses the issues of slow performance and project structural changes associated with the .mdzip format. Using .szip, you can export and import projects more quickly without altering the project structure.

    In version 2024x, we further improved the .szip format by introducing a new UI dialog that allows you to select which projects you want to import to the server and which to skip. This gives you greater control over the file exchange process.


    Image Added

    The charts below depict how the .szip project format increases the performance of project export and import operations when compared to .mdzip. Depending on the project size element and used project count-wise, the performance gain for export can vary between 2-20 times, while the project import speed has been increased by roughly 40%.


    Image Added Image Added

    Comparing the import and export performance of Project #1 (1M elements, 57 Used Projects), Project #2 (2M elements, 7 Used Projects), and Project #3 (2M+ elements, 3 Used Projects).


    Model Patch Mechanism (Technology Preview)

    We introduce the technology preview of the Model Patch mechanism, a more lightweight way to move model changes. Model Patch can help you:

    • Move changes from one branch to another without the need to perform a full Merge operation, which can be slow and cumbersome;
    • Transfer only a specific scope of model changes between disconnected teams instead of the entire model;
    • Reuse only the necessary subset of an external model as an alternative to bringing in the whole model as a Used Project.


    Image Added

    Anchor
    Power
    Power
    Power’By

    New Features to Manage Used Projects

    We added new features that provide you with better capabilities to manage used projects in 3DEXPERIENCE:

    • Export packages as a new server project;
    • Move elements to/from used projects;
    • Import used projects.

    Opening Projects in Read-Only Mode

    Beginning with version 2024x, you can open 3DEXPERIENCE projects in Read-Only mode. Projects open in this mode with a balloon notification if you do not have the necessary access rights or if the project is in Read-Only mode because of its maturity state.

    Image Added

    Notification informing the user that the 3DEXPERIENCE project is read-only.
    Element Auto-Numbering. Every time the diagram is opened, the active validation for numbering is triggered to maintain the uniqueness of displayed model elements that are numbered (e.g., requirements). The uniqueness check is now significantly faster when opening diagrams (including tables, matrices, etc.) containing up to 1000 numbered elements.
    Image Removed
    A chart comparing the time it takes to execute element number uniqueness check in a SysML (0.5M) project with 60k requirements in 2021x Refresh2 and 2022x.
    • Dependency Matrices. Further performance improvements have been introduced to matrix building; it is up to twice as fast compared to 2021x Refresh2.
    Image RemovedA chart comparing the SysML Allocation Matrix building time in 2021x Refresh2 and 2022x projects.

    Limits of Diagram Export as Image

    You can now specify dimension limits to prevent extremely large diagrams from being exported as images. Additionally, you can set a time limit for table and matrix building to skip image export. This is especially handy when exporting hundreds of diagrams, including large ones, i.e., generating reports and publishing models to Cameo Collaborator is significantly faster and smoother as the diagrams exceeding the limits are exported as cropped.

    Image Removed

    The diagram is cropped upon export based on Image Export options.

    Learn more about diagram export options >> 

    Teamwork Cloud-related Performance Improvements

    • Element History and Content History performance improvements. In version 2022x, we present major performance improvements of Element History and Content History, two of the most widely used features related to project history. Depending on the size and type of a project, the initial history results should now appear 3 to 10 times faster compared to our latest 2021x Refresh2 release.

    Image Removed

    A chart representing the improved Element History performance in version 2022x as compared to 2021x Refresh2.

    Image Removed

    A chart representing the improved Content History performance in version 2022x as compared to 2021x Refresh2.

    Back to top

    Content block
    id243174490
    Modeling and Infrastructure

    Diagram Banners

    From now on, you can create diagram banners, such as headers and/or footers, to display important information on the diagram. The diagram banners can be created for all diagram types, such as tables, matrices, or maps. Upon diagram image export, the diagram banners are also included in the exported image. 

    Image Removed

    A diagram with a diagram banner displayed at the bottom of the diagram pane.

    Learn more about diagram banners >>

    Using Structured Expressions in a More Intuitive Way

    Modelers rely on Structured Expressions to perform one of the basic tasks: querying the model. Building Structured Expressions is now easier and more efficient:

    • The smart result type update lets you forget about manually adjusting the type for columns or derived properties:

    Image Removed

  • The Property Test operation now supports more testing properties. In addition to checking properties' primitive values (e.g., string, boolean, integer), you can also test properties whose values are model elements:
    Image Removed

    • Apply the same type relation criterion with different properties multiple times:
    Image RemovedThe Unique check box allows you to control whether value duplicates should be taken into account using Simple and Metachain Navigation operations:
    Image Removed

    Additionally, there is enriched learning material that includes detailed steps for completing the most common model querying tasks. Learn more on the Case Studies for Querying the Model page >>

    Learn more about Structured Expressions >>

    Pre-bundled Plugins

    Installing plugins has now become easier. All available plugins, both commercial and no-cost, are now pre-bundled together with the installation files and automatically added to the Resource/Plugin Manager.

    Image Removed

    All available plugins are accessible via the pre-bundled core.rdzip file in the Resource/Plugin Manager.

    Learn more about plugin installation for CATIA Magic portfolio products >>

    Learn more about plugin installation for No Magic portfolio products >>

    Hide Results of Legend Items 

    You can now select the filtering preference (show or hide) to either display or hide the results of a Legend item.

    Image Removed

    Filtering a diagram by the selected Legend item Comment with the filtering preference set to Hide.

    Learn more about filtering by Legend items >>

    Easier and Safer Way to Manage Secure Connections

    With the release of version 2022x, we have consolidated server certificate management for all secure network connections made on the client-side. Now a new Server Certificates Management tool handles all secure connections supported by the client. In addition to automatically adding existing certificates from the operating system, the tool allows you to add or remove certificates without running complex commands via the command-line interface. You can simply use the Environment Options dialog in your modeling tool to:

    • See the list of all currently added certificates and their details.
    • Add new certificates or certificate storage trusted by the current user or by all users.
    • Manage all added certificates.

    Image Removed

    Managing secure connections.

    Other Improvements

    • The Product Line Engineering Plugin is now split into two plugins: the Variability Core Plugin, which provides technical mechanisms and functions for various PLE and Data Marking activities, and the Product Line Engineering Plugin, which provides Model-Based Product Line Engineering method support for the user.
    • The Project Merge Plugin is no longer pre-installed, so you will not be receiving license expiration notifications if the plugin is not used. In addition, you no longer need the Project Merge Plugin to execute project comparison, element and content history review, as this functionality is now part of the built-in Merge Core Plugin. The Project Merge Plugin is now only required for project merging functionality.
    • A new UML Invalid Redefinition validation rule has been introduced to the UML correctness constraints validation suite. It checks whether a property redefines the inherited property of the owner classifier. Learn more about UML validation rules >>

    • You now have the option to use a custom encryption algorithm instead of the default one with the Model Obfuscation Plugin. Learn more about Model Obfuscation >>

    • Now you can choose whether or not to display the Presentation Mode icon in the status bar.

    • From now on, when you create an Enumeration Literal, a Slot is created for it with the default value if the Slot's Defining Feature has one.
      Image Removed
    • Now there is an easy way of selecting model elements in the Containment tree from the Criteria area of a Table, Matrix, and Map.
      Image Removed

    Back to Top

    Content block
    id1292342252
    Discontinued Products

    Beginning with the 2022x version, support of the following products is discontinued:

    • CSV Import Plugin. Excel/CSV Sync or Excel/CSV Import features will be replacing the CSV Import Plugin.
    • MagicDraw Professional Java Edition Floating License and MagicDraw Professional Java Edition Seat License. Java Code Engineering will be available in the modeling tool Enterprise editions. For customers with active software assurance (ALC), the upgrade to the Enterprise edition will come at no cost.
    • JRuby scripting language. Any previously used scripts written in JRuby need to be rewritten in a different built-in scripting language. Otherwise, you can manually add JRuby to the modeling tool to continue using the existing JRuby scripts.
    • The Teamcenter Integration plugin. Starting with version 2022x, the Teamcenter Integration plugin is no longer available. You may continue to use your perpetual license of the product in accordance with the terms of your license agreement. The support for the product will be provided until the end of your current maintenance support subscription.
    Content block
    id1292358024
    Reader Mode

    Starting with this version, Reader is introduced as the modeling tool mode. Learn more about how to activate the Reader Mode >>

    Content block
    id243713866
    Collaboration

    Global Element Usage Search

    The 2022x version includes the release of production-ready Global Element Usage Search functionality. It allows you to search for usages of an element that you want to modify or delete. Depending on the server-side configuration, projects that use the element in question can be returned either from the entire Teamwork Cloud repository or the selected custom indexed scope. This minimizes the probability of unexpected Recovered Elements appearing when updating the Used Project versions.

    Image Removed

    Searching for element usages within the Teamwork Cloud repository.
    Learn more about the Global Element Usage Search feature >>

    Back to Top















    Content block
    id430554266

    Version news of servers and plugins >>