Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Content layer
id1102391337
Content column
id1102391340
Content block
id1102426125

On this page

Table of Contents
maxLevel4

Content block
id1102391339

You can use a Generic Safety Table to display all relevant elements depending on the selected scope as shown in the following figure. An element added as a scope element should extend the ISO 26262 library (e.g., Typical Automotive Situation, Accident Scenario, Hazardous Event, Automotive Effect).

An example of a Generic Safety Table

Creating a Generic Safety Table

You can create a Generic Safety Table as described below.


To create a Generic Safety Table


  1. In the Containment tree, select the element that you want to be the owner of the table.
  2. Do one of the following:
    • In the main menu, go to Diagrams > Create Diagram, then select Generic Safety Table in the open dialog.
    • In the Containment tree, right-click the owner of the table, select Create Diagram and select Generic Safety Table in the open dialog.



  3. When the table is created, type the name of the table and press Enter.
  4. Click  next to the Element Type box.
  5. In the Select Element Type dialog, select the types of elements you want to display in the table, and click OK.
  6. Click  next to the Scope box.
  7. On the left side of the Select Scope dialog, select the scope element of the table, click  to add the element to the selected elements area, and click OK.
  8. Add the desired columns to the table (by default, a Generic Safety Table has only the Name column).


Creating elements in a Generic Safety Table

There are two ways to create elements for a Generic Safety Table: you can do it right in the table or in the Containment tree. If you create an element in the Containment tree and it falls under the scope of a Generic Safety Table, the element is automatically added to the table. If you want to create an element right in a Generic Safety Table, follow the steps below.


To create an element in a Generic Safety Table


  1. In a Generic Safety Table, select a table row.
  2. Do one of the following:
    • In the table toolbar, click  to create an element of the same level as the one you have selected.
    • In the table toolbar, click to create an element nested under the selected element.

  3. Type the name of the new element and press Enter.


Case study: Creating Generic Safety Table for a custom element type

You can use a Generic Safety Table to display custom element types with their properties. Let's analyze the workflow of creating a custom Operational Situation and displaying it in a Generic Safety Table.


To create a custom Operational Situation and display it in a Generic Safety Table


  1. In your model, create a Profile Diagram.
  2. In the Profile Diagram, create a Class and name it, e.g., Crash Automotive Situation.
  3. Apply the «OperationalSituation» stereotype to the Class.
  4. In the ISO 26262 Library, find the TypicalAutomotiveSituation element and drag it to the Profile diagram.
  5. Create a Generalization relationship from the Class created in step 2 to TypicalAutomotiveSituation. Your Profile Diagram should look as displayed below.



  6. Save an reload the project.
  7. In the Containment tree, right-click the element you want to be the owner of a Generic Safety Table, select Create Diagram, and select Generic Safety Table in the open dialog.
  8. When the table is created, type the name of the table, e.g., Crash Operational Situations, and press Enter.
  9. Click  next to the Element Type box.
  10. In the Select Element Type dialog, select OperationalSituation, and click OK.
  11. Click  next to the Scope box.
  12. On the left side of the Select Scope dialog, select the scope element of the table, e.g., Crash Automotive Situation, click  to add the element to the selected elements area, and click OK.
  13. In the Generic Safety Table, create new elements of the custom element type defined as the table scope, e.g., Crash Automotive Situation.
  14. Add the desired columns to the table (by default, a Generic Safety Table has only the Name column).


After following the above steps and defining the properties displayed in your Generic Safety Table, it should look similar to the example below.

An example of a Generic Safety Table created for a custom Operational Situation.