Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

id1974282504

...

id1974282506

...

id1330578672

On this page:

Table of Contents

...

maxLevel4



The configuration

...

settings described in this section are optional. You only need to configure them if the default setting is not suitable for your environment. The Teamwork Cloud system will load the configuration file every time it starts. Therefore, changes

...

to the configuration file will be applied once you restart it.

Note

To configure Cassandra authentication, please see chapter Cassandra authentication.

Setting a Teamwork Cloud password for authentication with the  Authentication Server

Teamwork Cloud Admin uses an Authentication Server to authenticate users. Teamwork Cloud Admin needs a password to access /token endpoint of the Authentication Server. You need to specify the same password that is entered in the authentication server's configuration

...

file authserver.

...

properties (in the parameter authentication.client.secret). The default value

...

is CHANGE_ME. 

Code Block
titleauthserver.properties
esi.console {
....
#
 # The console client password parameter.
 client {
 pswd = "CHANGE_ME"
 }
...
}

Changing

...

log file location

You can configure the logging system of Teamwork Cloud by

...

using logback.xml. This file is located in the folder configuration

...

 of the Teamwork Cloud. You can change the name or location of the file by editing the following line in the file logback.xml.

  • In Teamwork Cloud, look for the following line: 

    Code Block
    titlelogback.xml
    <file>${user.home}/.twcloud/2021x/server.log</file>


When changing the log file name and location, you need to be sure that the user account to your Operating System (OS) that you will use to start Teamwork Cloud has the write permission in the new configured location. To learn more about logback configuration,

...

see http://logback.qos.ch/manual/configuration.html.

Setting a server port

The default port number of Teamwork Cloud for the client to connect to

...

is 3579. However, the port number is changeable. If you would like to change the default port number, for example, to 3580, you can configure this in the Teamwork Cloud configuration file, application.conf Search for the content shown below, and edit as follows:

Code Block
languagetext
titleapplication.conf
net
	{
		connectors = [
			{
				# The ip address to bind to (for client connection).
				# The default value is bind to all IPs.
				host = "0.0.0.0"
				
				# Port for client application to connect to. The default value is 3579.
				# This is corresponding to the port specified when connecting from client such as MagicDraw. 
				port = 3580

The configuration file, application.conf, is located in the directory configuration

...

 under the Teamwork Cloud program folder. For example, /opt/TeamworkCloud/

...

configuration/application.conf. The configuration file is in HOCON format ("Human-Optimized Config Object Notation"). For more information about HOCON file format, visit the following link https://github.com/typesafehub/config/blob/master/HOCON.md#syntax.

Please note that MagicDraw is considered as a client of Teamwork Cloud. Consequently, if you change this setting, you

...

have to specify the port number while connecting from MagicDraw.

Setting a public IP

If Teamwork Cloud is deployed in the environment where the client will connect to the server via a public IP (NATed to a private IP), set the

...

parameter server-broadcast-host to the public IP address and host to the private IP. Search for the content in application.conf and edit as follows:

Code Block
languagetext
net
	{
		connectors = [
			{
				# The ip address to bind to (for client connection).
				# The default value is bind to all IPs.
				host = "0.0.0.0"
				
				# Port for client application to connect to. The default value is 3579.
				# This is corresponding to the port specified when connecting from client such as MagicDraw. 
				port = 3579
				
				protocol = "raw"
			}
		]
		
		# To support deploying 

...

Teamwork Cloud in private network, but client connects from public network,
		# Specify IP address that will be used by client to connect to this Teamwork 

...

Cloud from public network.
		# This value will be default to esi.net.host if it is empty.
		# server-broadcast-host is not recommended to use.
		server-broadcast-host = "PUBLIC_IP_ADDRESS"
	}

Configuring secure SSL communication between Teamwork Cloud and Cassandra

You can set up secure communication between Teamwork Cloud and Cassandra. For this, you need to

...

configure application.conf (Teamwork Cloud side)

...

and cassandra.yaml (Cassandra side) files. 

Configuring application.conf

  1. Locate and open

...

  1. the application.conf

...

  1.  file.
  2. Search for the following section:

    Code Block
    # Secure connection with SSL between Cassandra and 

...

  1. Teamwork Cloud
    esi.security {
        cassandra {
            enabled = true
        	keystorePath = "

...

  1. <Teamwork Cloud installation folder>/configuration/keystore.p12"
        	keystoreType = "<keystore_type>"
        	keystorePassword = "<keystore_password>"
        	truststorePath = "

...

  1. <Teamwork Cloud installation folder>/configuration/keystore.p12"
            truststoreType = "<truststore_type>"
            truststorePassword = "<truststore_password>"
        }
    }


  2. Configure the properties, as shown in the example above:

    • enabled = true
    • keystorePath = 

...

    • <Teamwork Cloud installation folder>/configuration/keystore.p12
    • keystoreType = <keystore_type>
    • keystorePassword = <keystore_password>
    • truststorePath = 

...

    • <Teamwork Cloud installation folder>/configuration/keystore.p12
    • truststoreType = <truststore_type>
    • truststorePassword = <truststore_password>
  1. Save the changes. 

Configuring cassandra.yaml

  • Locate and open the cassandra.yaml file.

  • Configure the following properties:
    client_encryption_options

    • enabled: true
    • optional: false

      Note

      If

...

    •  enabled and optional

...

    •  are set to true, encrypted and unencrypted connections are handled.


    • keystore:  

...

    • <Teamwork Cloud installation folder>/configuration/keystore.p12
    • keystore_password<keystore_password>
    • require_client_authtrue
  • If require_client_auth is set to true, set truststore and truststore_password:
    • truststore

...

    • <Teamwork Cloud installation folder>/configuration/keystore.p12
    • truststore_password<truststore_password>
  • Use these advanced defaults:
    • protocolTLS
    • algorithmSunX509
    • store_typePKCS12

...

id1974282503

Related pages

...