Signal Processor example to Simulink model

To generate a Simulink model directly from the modeling tool

---

1. Right-click the block TestBed and select Tools > Export to Simulink.
   
   
   

2. In the Simulink Export Options dialog, set the options listed below and click OK:

   • Format: XML (.slx)

   • S-Function or Simscape: S-Function version 2
     
     
     
     

3. Launch Matlab with Simulink extension, and open the TestBed.slx file with the help of the Current Folder browser.
   
   
   
   
4. In the Current Folder panel, double-click on the file named TestBed.slx. The TestBed model will open up in a new Simulink window. Rearrange the blocks to reflect the signal flow arrowheads.
   
   
   
   
5. Open the Library Browser either by clicking the Library Browser icon or by going to Tools > Library Browser. Click Simulink> Sinks and select Scope.
   
   
   
   
6. Drag and drop one Scope block from the Sinks library list into the TestBed Simulink model. Attach a signal line segment from the Scope port onto the signal line that connects the dsp block and the scopeSignalOutput block. Repeat the process of adding a Scope block and attaching it to the signal line that connects the inputSignal block to the dsp block.
   
   
   
   
7. Go to Modeling>Model Settings:

1. 1. In the Simulation time section Select the Start Time as 0, and the Stop Time as 20.

   2. In the Solver selection section, select Variable-step as the solver type.

   3. In the Solver details section, set the Max step size to 0.01, click Apply, and then click OK.
      
      

      
      
      

2. Go to Simulation>Run. Double-click on the Scope blocks to see the simulation results.